Film Technology logo

Quick Draw PA 6000 Series Film

QuickDraw™ PA 6000 self-venting, high-temperature Nylon 6 film designed to eliminate breathers, bleeders and release films in general vacuum bagging processes. Typical Applications include vacuum bagging of pre-pregs, wet lay ups, and core materials; laminating veneers and forming and bonding high strength transparencies. Transparent Quick Draw™ films are uniquely capable of vacuum bagging U.V. cured resins. The Quick Draw™ PA 6000 series film is available in both 2 mil and 3 mil thickness. We recommend using 2 mil in applications where superior drapability is key; 3 mil is best used over foam cores or sharp corners to prevent tearing.


Max Use Temperature 400°F (204°C)
Melt Temperature
Fisher Johns
420°F (215°C)
422°F (228°C)

Heat Seal Range

440-475°F (226-246°C)
Shrinkage @ 350°F (117°C) Less than .5%
Flammability Self Extinguishing
Tensile Strength, ASTM D882 15,000 psi
Yield Strength, ASTM D882 4,600 psi
Elongation, ASTM D882 425%
* Physical properties measured @ 72°F (22°C) 50% R. H., 2 mil film


Thickness 2 mil, 3 mil
Width In increments from 48" to 107"
Configuration 50 - 107 lb. rolls
(approx. 1lb/inch of width)
Rolls on 3" or 6" cores
Recommended Storage Conditions 40-70°F (10-21°C) @ 40-70% R.H


Quick Draw™ PA 6000 Series can be damaged by contact with the following chemicals: m cresol, formic acid, phenol, potassium thiocyanate and 2,2,3,3 tetra fluoropropane.
Film Technology, Inc. • P.O. Box 230228 Houston, Texas 77023 • 713.921-FILM (713.921.3456)
U.S. Patent No. 5129813 . New Wrinkle and Quick Draw are trademarks of Film Technology, Inc. All rights reserved.